page contents

Orders Will Not Be Shipped April 6th Through April 22nd

Choose either stripper copper of Quickplug ends, Talon clip igniter.

3 Meter Non-Pyrogen Fireworks Clip Igniters (75 Igniters), Choose Connection Option

(8 reviews) Write a Review
$57.90
SKU:
3m-75igniter
Availability:
Usually ships within two business days
Shipping:
Calculated at Checkout

Each unit contains seventy five 3 meter / 9.8 ft. wire non-pyrogen Talon electric clip igniters for the igniting a fireworks display with orange wire.  

Please choose between traditional stripped copper wire ends, or Quickplug connectors for systems (Ignite i18) and slats that utilize Quickplugs before adding to the cart.


Installation Tips:

The non-pyrogen clip igniters are designed to ignite fuse using a power source 12 volts or greater.

Non-pyrogen clip igniters should only be hooked to the firing system in parallel.

When installing the clip igniter onto the fuse don't move the clip up, down, or side to side once on the fuse. This will weaken or break the filament.

Move the wire from between the clip bending the wire at 90 degrees, open the igniter like a clothespin, place the fuse in the slot and close the igniter. Cutting off the extra fuse makes the igniter easy to tape in place but not necessary . Secure in place with tape so the igniter won't move, breaking the filament.

If a firing system is powered by an alkaline battery power source, weaken the fuse outer coating so the clip igniter filament ignites the fuse quickly. The fuse outer coating can be scraped off or a V can be cut in the outer shell of the fuse with a razor knife and the clip filament placed in the V cut in the fuse.

Use the clip igniters out of the original bag they come in, seal when not in use. The clips snag on one another as you pull them out of the bag.

Do not store the igniters in a warm environment or in direct sunlight. Store in the house not in the warm garage in the sealed plastic bag so the rubber bands won't weaken.

Non-pyrogen clip igniters can be safely installed on the firework before taking the product in the field so the user can spend less time in the field setting up a show.

  • 5
    My go-to for clip igniters

    Posted by Scott on 25th Jun 2023

    I order all of my clip igniters from Dewey. These always work without issue.

  • 5
    3 and 5 meter non-pyrogen clip igniters

    Posted by Kavin Kreuzburg on 11th Aug 2022

    I have used these clip igniters for several years and very pleased. They work for me and I do recommend you give this product a try. Fast and reliable service, absolutely Top Notch customer service.

  • 5
    3 Meters Igniters

    Posted by Unknown on 12th Jul 2021

    Received the ignitors when promised. They work as advertised. The owner called and talked with me about the order. He is someone I will continue to order from items I need.

  • 5
    Igniters

    Posted by PyroBros07 on 6th Jul 2021

    Fast shipping a week before the 4th! Great product, worked flawlessly!

  • 5
    Awesome!!!

    Posted by Matthew on 21st Jan 2021

    These are awesome! No issues or miss fires at all!! Make sure you have 1-2 different lengths depending how far you want to spread things apart. The 3M & 5M are perfect. I put my firing boxes under the centre table (used my 3M for the top) and run the 5M igniters to my right and left table which had things nicely spread out! Watch the videos available to install properly.

  • 5
    great as usual

    Posted by Andrew M on 26th Jun 2020

    reliable connectors, arrived very quickly and packaged with care. Thanks!

  • 5
    Ignitors

    Posted by Ryan on 18th Jun 2020

    Class Act!! Great service, fast service!!

  • 5
    Talons

    Posted by Mark on 8th Jun 2020

    Shipping was fast. They work great!