page contents
  Loading... Please wait...
  • Included is one Renegade32 slat mounted in a yellow Seahorse 300 case. The Renegade 32 cue slat is the  perfect mate for the SparkFire with a cn36 port or any 32 cue firing system with a 36 pin centronics cable output and will work with all popular 32 cue systems that currently use a 32 cue slat.
  • The Renegade 32 cue slat has a continuity test circuit incorporated into the slat so the user can test continuity at the slat, not at the firing system. The user can also use an empty Genegade slat to continuity check other slats using a short centronics cable.
  • Included is one Renegade32 slat mounted in a yellow Seahorse 300 case. The Renegade 32 cue slat is perfect mate for the SparkFire with a cn36 port or any 32 cue firing system with a 36 pin centronics cable output and will work with all popular 32 cue systems that currently use a 32 cue slat.
  • After placing the igniters in the cues and testing, the case can be set on the case front so debris and water doesn't enter the case.
  • Yellow SE300 Case
  • Orange SE300 Case
  • Black SE300 Case
  • Grey SE300 Case

Renegade 32 Cue Slat in SE300 Case

$104.00

Product Description

Included is one Renegade32 slat mounted in a Seahorse 300 case. A yellow SE300 case is standard, also available is orange, black and gray case colors.

The Renegade 32 cue slat is perfect for any 32 cue firing system with a centronics cable output and will work with all popular 32 cue systems that currently use a 32 cue slat.

The Renegade32 slat can be used with the Merlock digital firing system, MS32Q Pro or SparkFire firing system equipped with a cn36 port.

The best source for firing system 36 pin centronics cables is acepyro.com.

Product Information:

Two centronic 36 pin connectors hooked in parallel so the slats can be chained together to form fronts.

The Renegade32 can be mounted on a board or mounted in a Seahorse 300 case.

The Renegade32 has a continuity test circuit incorporated into the slat. A 9 volt battery (not provided) supplies power to the continuity test circuit with a low two milliamp test amperage. To continuity test the cues leave cables detached from the slat, then push down the two switches located under the battery holder at the same time.

The Renegade32 slat can be used as a continuity tester for any 32 cue slat. Simply plug an empty (no igniters in the cues) Renegade32 slat into any 32 cue slat using a centronics cable and push the continuity buttons to check slat continuity.

The cue terminals are large and replaceable.

Warranty:

One year parts defect warranty. Scratches and burns are not covered. Water damage is not covered. Misuse is not covered.

Product Videos

Renegade32 Slat For Fireworks Firing System 09:08

Visit www.remotefiringsystems.com for ordering information. The Renegade 32 slat can be used with any 32 cue firing system that uses centronics cables. The slat has built in cue continuity test circuit powered by a 9 volt battery, two centronic ports hooked in parallel, and can be mounted to a piece of plywood with screws and spacers or mounted in a Seahorse 300 case using #4 by 3/8" screws. SE300 case- http://www.casesbymasco.com/product-121168/Se300-Case.html Centronics cables - http://www.acepyro.com/Shop/FiringSystems

  • Renegade32 Sla...
    Visit www.remotefiringsystems.com for ordering information. Th...
  • Fireworks Set ...
    A short video showing how I set fireworks around a firing syst...

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Quantity:
SKU:
renegade32-case
Availability:
Usually ships within two business days
Shipping:
Calculated at checkout