page contents
  Loading... Please wait...
  • Included with the MB32Q firing system is the MB32Q receiver, plastic case, manual remote, program/stepper remote, 2 keys, antenna, external battery wire, nimh battery charger, software, and USB cable.
  • Included with the MB32Q firing system is the MB32Q receiver, plastic case, manual remote, program/stepper remote, 2 keys, antenna, external battery wire, nimh battery charger, software, and USB cable.
  • Included with the MB32Q firing system is the MB32Q receiver, plastic case, manual remote, program/stepper remote, 2 keys, antenna, external battery wire, nimh battery charger, software, and USB cable.
  • The MB32Q firing system can be powered by quality AA alkaline batteries or rechargeable nimh AA batteries. The internal power source can ignite two Talon clip igniters per cue or six ematches in series.
  • The MB32Q firing system can be powered by an external battery 12 volts to 24 volts. The battery size should be above 2ah in capacity.
A good 12 volt external battery can ignite six Talon clip igniters or ematches in parallel or 12 ematches in series.
  • The MB32Q firing system can be powered by an external battery 12 volts to 24 volts. The battery size should be above 2ah in capacity.
A good 12 volt external battery can ignite six Talon clip igniters or ematches in parallel or 12 ematches in series.
  • RFRemotech MB32Q Firing System with Talon clip igniters installed.
  • MB32Q program buttons
  • MB32Q firing system screen shot
  • MB32Q  firing system screen shot.
  • MB32Q Program Screen Shot
  • MB32Q Screen shot
  • Image 13
  • MB32Q manual remote
  • MB32Q remote battery door
  • MB32Q firing system remote
  • MB32Q program and stepper remote.
  • The MB32Q remote is backlit.
  • MB32Q backlit remote.

RFRemotech - MB32Q 32 Cue Programable Firing System

$372.00

Product Description

 Take your fireworks display to the next level using the RFRemotech MB32Q. The MB32Q can be used in simple manual mode, sequence mode, stepper mode and for a fully scripted and programmed pyro musical.

 Included with the MB32Q firing system is the MB32Q receiver, plastic case, manual remote, program/stepper remote, 2 keys, antenna, external battery wire, nimh battery charger, scripting software, and USB cable.

  MB32Q Key Features:

The MB32Q firing system can be controlled in manual mode with the TCF200-12LN remote, and in program, sequence, and step modes using the TCF200-6XT or the TCF200-U multi-function remote.

The MB32Q firing system cue time sequence can be programmed using the buttons and screen on the MB32Q firing module or using the included computer scripting and melody software and USB cord to load a program you create on a computer directly into the MB32Q firing module. Go to the RFRemotech website for more information about the scripting software.

Click Here Software Link                           

Click Here Melody Combiner Link

The MB32Q firing system has advanced cue overload protection with the capability of 10 amps output, and reverse protection to insure the firing system cues are not damaged from shorted wires installed in the cues. If there is a shorted igniter in a cue, the cue will not activate. Other features include a low power alarm and shorted cue warning.


The MB32Q can be powered using high quality AA batteries like Energizer Industrial or Duracell Procell installed behind the module rear battery door. The high quality AA alkaline batteries will ignite two non-pyrogen clip igniters or three e-matches hooked in parallel, or six e-matches in series.


The MB32Q can be powered by a 12 to 24 volt external power source using the external jumper provided. We recommend a power source that's 2ah or larger in capacity. A 12 volt sealed lead acid battery or an 18 volt DeWalt power tool battery are a few examples of batteries that could be used to power the MB32Q. Using the two batteries mentioned above the MB32Q can ignite six clip igniters or six e-matches in parallel, or twelve e-matches in series.

  Manual Transmitter Key Features:


The 433.92 MHz FSK 200 meter transmitter works with the RFRemotech MS32Q, MB32Q, and MS32Q Pro firing systems.

On/Off power switch

Backlit buttons

Red LED when turned on. Green indicator LED when transmitting.

The transmitter goes to sleep / locks after three minutes with no use to save battery life and for security.

Advanced transmitter technology sending out packets of information when transmitting.

200 meter range. We recommend the MB32Q is used at least eighteen inches off the ground with antenna extended straight up for best results. The transmitter antenna should be extended, at least four feet off the ground, pointed straight up.

Powered by a 12 volt A23 battery under the back cover.

 Program/Stepper Remote Key features:

The 433.92 MHz FSK 200 meter transmitter works with the RFRemotech MS32Q, MB32Q and MS32Q Pro firing systems.

On/Off switch

Back Lit Buttons

Red LED when turned on. Green indicator LED when transmitting.

Lock/Unlock Button; alloys the user to lock and unlock the remote for safety without turning the remote off.

Stop Button; reset the firing module back to the first cue.

Stepper Button; push one button to step through all 32 cue.

Sleep Mode; the backlight shuts off after three minutes to save battery power. The Unlock button must be pushed before the remote can be used again or the on/off switch is turned off then back on.

Start Button; start a program installed in the MB32Q module.

Pause button; pause a program installed in the MB32Q module.

Continue button; continue an installed program in the MB32Q module.



Why purchase the MB32Q from Remote Firing Systems .com?

The transmitter and receiver are taken apart and inspected for quality.

A conformal coating is applied to all received electronic components for water damage and corrosion protection.

The transmitter and receiver are range tested at 650 feet and load tested for proper operation before shipping to the customer.

Free one year warranty; the manufacture does not provide a warranty.

The MB32Q is not a disposable firing system, it can be returned for repair if a problem does arise.



Warranty:

One year parts defect warranty. Scratches and burns are not covered. Water damage is not covered. Misuse is not covered.

Product Videos

RFRemotech MB32Q Remote Firing System Part 1 19:59

www.remotefiringsystems.com is now selling the RFRemotech MB32Q programmable firing system. Look for more videos in the near future about using the system and all of its features.

  • RFRemotech MB3...
    www.remotefiringsystems.com is now selling the RFRemotech MB32...
  • RFRemotech MB3...
    www.remotefiringsystems.com In this video I illustrate how to ...
  • RFRemotech MB3...
    www.remotefiringsystems.com The RFRemotech can be controlled b...
  • RFRemotech MB3...
    www.remotefiringsystems.com A video on what is on the disk tha...
  • RFRemotech MB3...
    www.remotefiringsystems.com How to use the RFRemotech scripti...
  • RFRemotech MB3...
    www.remotefiringsystems.com Playing with the RFRemotech script...
  • RFRemotech MB3...
    www.remotefiringsystems.com Scripting a 1.4 show in the MB32Q...

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Quantity:
SKU:
mb32q
Availability:
Usually ships within two business days
Shipping:
Calculated at checkout