page contents
  • The SparkFire I is mounted in a yellow Seahorse 300 case and includes an internal 12 volt 2.3 ah SLA rechargeable battery, black TCFX200-LN transmitter, antenna, two keys, and external battery jumper.
  • The SparkFire is mounted in a rugged Seahorse case.
  • SparkFire with igniters in the cues. Shoot your next fireworks display safely and look like a professional.
  • The internal 12 volt battery is securely mounted in the case. The battery can be replaced in fifteen minutes using a Philips screwdriver.
  • To charge the SparkFire internal battery, plug the SparkFire charger (sold separate) into the SparkFire charger port, then plug into the wall.
  • The SparkFire can be hooked to an external power source 12 to 24 volts even with an internal battery. The firing system will be powered by the battery with the higher voltage.
  • The LED on the front next to the antenna SMA connector is hooked to cues A1 and D8 and when either cue is activated the LED will illuminate. This is helpful in the field for range checking or to make sure the SparkFire is responding to the remote.
  • The 200 meter remote is backlit.
  • The 200 meter remote is powered by a 12 volt A23 battery.
  • The 200 meter remote has an on/off switch and a retractable antenna.

SparkFire I32 - 32 Cue Remote Wireless Firing System

$345.00 $323.00
(You save $22.00)

Product Description

The SparkFire I32 is mounted in a yellow Seahorse 300 case and includes an internal 12 volt 2.3 ah SLA rechargeable battery, black TCFX200-LN transmitter, antenna, two keys, and external battery jumper. The SparkFire internal battery charger is sold separately.

Note: If this is your first SparkFire I32 firing system remember to purchase the SparkFire internal battery charger.

Note: A black or orange case can be special ordered.

 Key Features:

Affordable; the base model price is under $11 per cue.

The SparkFire I32 is not a disposable firing system, it can be returned for repair. When the parts arrive in Iowa, the parts are inspected, assembled, then tested for proper operation before shipping to the customer.

Compatible with the white FSK handheld transmitter, new black FSK handheld transmitter, new multi-function transmitter and the S12 / S12C transmitters.

The SparkFire can be used with the SuperbFire FSK, S32I, and S32E from the same transmitter.

Faceplate design mounted in a Seahorse 300 case.

Conformal coating applied to the PCB board and electronic parts to minimize corrosion.

Operating temperature. The SparkFire has been tested at -10 degrees.

Internal 12 volt 2.3ah sla rechargeable battery. The internal battery is easy to replace. External power 12 volts to 24 volts using the jumper provided. The power source should be above 2 ah in capacity.

The SparkFire heavy duty output can ignite 10 non-pyrogen clip igniters, I-match or e-matches in parallel hooked to a 12 volt power source, and is capable of igniting 20 e-matches in series from each cue when hooked to a 24 volt power source.

Dual overload protection; current limiting and heat limiting. Protects the firing system from high current situations and heat damaged circuits. Safer and less maintenance.

Three firing modes; manual, sequence, and step when controlled by the new multi-function transmitter.

New black handheld 200 meter manual transmitter features; backlit buttons, on/off switch, self locking after three minutes of no use, and advanced transmitting technology transmitting packets of information.

 

Warranty:

One year parts defect warranty. Scratches and burns are not covered. Water damage is not covered. Misuse is not covered. The Seahorse case has a manufacturer's lifetime guarantee.

 

Product Videos

SparkFire Remote Wireless Fireworks Firing System 25:19

SparkFire wireless remote firing system for the ignition of fireworks. Visit www.remotefiringsystems.com for more information.

  • SparkFire Remo...
    SparkFire wireless remote firing system for the ignition of fi...
  • TCFX200-LN Bla...
    Transmitter for S32E and S32I with program button, SuperbFire ...
  • Multi-Function...
    The transmitter will control firing systems RFRemoTech manufac...
  • Fireworks Set ...
    A short video showing how I set fireworks around a firing syst...
  • Clip Igniter I...
  • SparkFire Remo...
    Visit Remote Firing Systems .com for more information. www.rem...
  • Non-Pyrogen Ta...

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Quantity:
SKU:
sparkfire-int
Availability:
Usually ships within two business days
Shipping:
Calculated at checkout